Jeff SeldenJan 164 minIntelligent Slicing – Automatic Selection of 3D Print Parameters for Structural PerformanceTeton Simulation is developing a super-fast physics simulation tool embedded in the slicer to validate structural performance...
Rick DalgarnoDec 9, 20195 minThermal Effects and FFF Bond StrengthThe key to healing the bond is to sustain a temperature at the interface that is above Tg for as long as possible.
Rick DalgarnoOct 22, 20195 minSearching for Trends in FFF Interlayer Strength versus Layer HeightSo which trend is correct? Does the interlayer strength increase or decrease as the layer height increases?
Tyler HeckenlivelySep 25, 20193 minEffects of Build Orientation and Raster Angle on the Tensile Behavior of 3D Printed PartsIn our previous posts we identified the importance of two slicing parameters, namely layer height and layer width, and the build orientation when using fused...
dougkenikAug 13, 20193 minThe Effect of Layer Height and Extrusion Width on Stiffness of 3D Printed Parts In our last post we introduced the concept of anisotropy of 3D printed parts. For a summary - as we investigate at the stiffness of 3D printed parts in vario...
Rick DalgarnoJul 23, 20194 minIntroduction to Anisotropy of 3D Printed PartsThe stiffnesses of the block in the 3 directions will be different. Either by a little or a lot depending on the print parameters and build
Teton SimulationMay 1, 20191 minTeton Selected to Present at RAPID Innovation AuditionsTeton has been one of 8 companies selected to present at this year's RAPID + TCT Innovation Auditions on May 21, from 1:30 to 2:30 PM in the Show Theater in ...
Teton SimulationApr 24, 20191 minIntelligent Slicing AutomationFabbaloo recently wrote a great article on Teton and our intent to debut Intelligent Slicing Automation at RAPID + TCT on May 21-24 in Detroit, MI.
Teton SimulationDec 28, 20182 minWebinar: 5 Common Composite Design Oversights - And How to Avoid Them!Webinar on Tue, Feb 12th from 9-10 AM MST Wondering how to effectively take advantage of composites in your components to reduce design iterations? Join us i...
Teton SimulationDec 7, 20181 minTeton R&D Director Talks 3d Printing SoftwareWatch this short clip by Andy Hansen giving a great overview of the game-changing 3d Printing technology under development by Teton Composites.
Teton SimulationOct 17, 20182 minTeton Composites Awarded Phase II Grant from the National Science FoundationAmerica’s Seed Fund Powered by NSF Provides Funding for R&D; Helps small businesses move innovations out of the lab and into the market Laramie, WY, October ...
Teton SimulationDec 13, 20171 minTeton Composites Offers Finite Element Analysis ServicesLaramie, WY, December 13, 2017– Teton Composites is pleased to announce the formation of its Finite Element Analysis (FEA) Service Business. The business spe...
Teton SimulationNov 28, 20172 minTeton Composites Awarded Competitive Grant from the National Science FoundationSmall Business Innovation Research Program Provides Seed Funding for R&D Laramie, WY, August 1, 2017–Teton Composites, Inc. has been awarded a National Scien...
Teton SimulationNov 27, 20171 minRick Dalgarno Joins Teton CompositesTeton Composites Announces the Hire of Rick Dalgarno as Director of Analysis Services. Teton Composites is pleased to announce that Rick Dalgarno has joined ...
