LEHVOSS_case_study
Case Study: 3D Printed Molds for Orthotics
A cooperation of adViva, Teton Simulation, Ultimaker and LEHVOSS Group

Learn how adViva and LEHVOSS utilize SmartSlice for Ultimaker Cura to validate in-service performance and optimization of print settings for orthotics molds, ensuring the printed part meets performance requirements while minimizing print time and material usage.
 Read Now and Watch Video Presentation

render2-1
Case Study: Validating SmartSlice using Polymaker PolyMide™ CoPA

Discover how a roof rack bracket printed from PolyMide™ CoPA was optimized using SmartSlice and experimentally validated with experimental data.
 Read Now

BASF Forward AM brake lever
Case Study: Increasing Part Stiffness of Lightweight FFF End-Use Parts by Simulation

Learn how BASF Forward AM reduced print time and part mass by over 30% using Smart Slice on a brake lever printed from Ultrafuse® PAHT CF15.
 Read Now